CERAMIC COATINGS

"ICE" 2 year Ceramic Coating

A ceramic coating's job is to look good, protect your paint and to make maintenance easier, but durability just as important. Many coatings on the market are produced to last up to a year, which means in the best case scenario, you'll only need to reapply once a year, but we've decided to raise the standard...

Our flagship coating "ICE" was developed to last up to two years and with proper maintenance can even exceed that time. Superior durability = superior protection for your vehicle.

• Excellent hydrophobicity 115° water beading

• Chemical resistance 2-12 pH

• Superb protection against harmful UV rays

• Deep and lasting gloss

• 2 year durability

"BLACK ICE" 5 year Graphene Coating

If you're looking for a coating that makes no compromises in shine, no exceptions when it comes to protection and that will go the long haul, "BLACK ICE" is the one for you.

Graphene coatings are well known in the detailing industry as being very durable and for proving to be more efficient than ceramic coatings, but just as with our flagship ceramic coating, we've raised the bar once again...

Our chemists have re-engineered our coating to form a higher cross-linking density between the graphene and ceramic particles forming a much denser and durable coating. In other words our graphene coating is much more resilient to elements such as bird droppings, chemicals and road grime and has a much better resistance to water spotting.

• Superior hydrophobicity °118 water beading

• Chemical resistance 2-12 pH

• Superb protection against harmful UV rays

• Deep and durable gloss

• Excellent water spot resistance

• 5 year durability

Si02 Base Polish - Ceramic AIO and pre-coat polish

Si02 Base can be used as a stand-alone, one-step polish with up to 6 months durability or as a finishing polish to be used before applying either “ICE” or “BLACK ICE” ceramic and graphene coatings. Si02 Base Polish is fortified with Si02 and select abrasives and not only does it deep clean painted surfaces, but it also physically lays the foundation for our coatings at the same time. After polishing there is no need to degrease the surface before applying a coating!

INSTRUCTIONS FOR USE:

Thoroughly clean and prep the surface before polishing to ensure proper bonding! Apply 3-4 pea-sized drops of polish to a clean or new polishing pad and work into the surface to prime the pad. Once primed only 2-3 drops for a 40x40 area should be necessary. Work the polish at a medium speed until it breaks down and polish to a high gloss. Remove excess with a clean microfiber towel. If used as a one-step, there is nothing further. If used as a ceramic coating base, allow to dry at least 30 minutes before applying the coating! Do not degrease the surface after polishing, the coating should be applied to the freshly Si02 Base polished surface!